Vásárlói vélemények

Írja meg a véleményét
  • Minden vélemény (48)
  • Kép (3)
  • Videó (0)
  • Minden csillag
    • Minden csillag(48)
    • 5 Csillag(41)
    • 4 Csillag(6)
    • 3 Csillag(1)
    • 2 Csillag(0)
    • 1 Csillag(0)
Sorrend:
Legjobb áttekintés
  • Legjobb áttekintés
  • Leghasznosabb
  • Legfrissebb
Csak az Ön országából származó vélemények (Hungary)
|
Mutasd az eredetit

A felülvizsgálat egy részét automatikusan lefordították.

  • 17/02/2017

    Приобрёл сей девайс для своего байка:сразу по качеству(пластик абс,винтовые соединения металл),сделано качественно,крепко,резьба на штативе стандартная,на фото видно камера прикручена... Вообщем покупкой я доволен,тем более у нас такого не нашёл...

    Hozzászólások
    Mutasd az eredetit
  • 14/02/2019

    uchwyt jest bardzo dobry. zero luzów czy trzasków. jest stabilny. Można bez obaw zamocować kamerkę. nic się nie dzieje w czasie jazdy. Za tą cenę polecam. dostawa w 2 tygodnie. Możliwość śledzenia przesyłki.

    Hozzászólások
    Mutasd az eredetit
  • 23/08/2017

    Plastic doesn't seems very strong but it's good for the price paid. Let's see if it can hold the first fall ;)

    Hozzászólások
    Mutasd az eredetit
  • 12/04/2021

    Nagyon jó, köszönöm

    Hozzászólások
    Mutasd az eredetit
  • 10/10/2014

    Ребяты,это вообще весчь)))! Долго мечтал о таком крепеже! Рекомендую всем у кого есть велосипед,старый фотоаппарат-мыльница и у кого нет денег и желания покупать дорогие экшн-камеры. Сделан качественно! Цена вообще адекватная! Легко крепится на руль,угол наклона фотоаппарата можно менять. Сами смотрите всё тут:http://youtu.be/qriuppthmFo?t=3m38s и тут: http://youtu.be/2uWw7wNvsgY

    Hozzászólások
    Mutasd az eredetit
  • 01/01/2018

    It is almost as if this device was copied by someone who does not know about tripod / camera heads and bicycle handlebars. The handlebar clamp does not have the expected quick open. The knob has to be fully unscrewed and removed for the clamp to be fully opened for fitting to the bike. This is not quick by any means. The camera screw and nut are a loose thread. The screw projects more than the camera safe 1/4" so on some cameras it cannot be screwed all the way in without damaging the camera. The lock nut is a loose cut thread - it will not tighten up on the camera. The solution I found is to put a metal washer on the camara screw beneath the lock nut; then tighten the lock nut down onto the washer. This enables the screw to be operated by turning the nut to thread it onto the camera. Without the nut locked onto the screw, the camera must be held and twisted down onto the screw.... not very good at all. With a little thought, the bugs can be worked out. As it comes, it is not quite right. Good value for the hobbyist to fix and use.

    Hozzászólások (1)
    Mutasd az eredetit
  • 26/02/2016

    High quality product. Highly recommended!!!High quality product. Highly recommended!!!High quality product. Highly recommended!!!High quality product. Highly recommended!!!High quality product. Highly recommended!!!High quality product. Highly recommended!!!High quality product. Highly recommended!!!High quality product. Highly recommended!!!High quality product. Highly recommended!!!High quality product. Highly recommended!!!High quality product. Highly recommended!!!High quality product. Highly recommended!!!High quality product. Highly recommended!!!High quality product. Highly recommended!!!High quality product. Highly recommended!!!High quality product. Highly recommended!!!High quality product. Highly recommended!!!

    Hozzászólások
    Mutasd az eredetit
  • 30/09/2018

    looks to be solidly built. have not used it on my bike yet. one drawback is that the mounting nut must be completely unthreaded before the mount can open - a slot would have been nice.

    Hozzászólások
    Mutasd az eredetit
  • 20/02/2016

    In all, this bracket is well made, without sharp corners or burrs. Works well as intended. One negative point is its ball joint is very stiff. After loosening nut, the ball joint does not rotate freely. Result is changing camera direction needs some force.

    Hozzászólások (1)
    Mutasd az eredetit
  • 15/02/2016

    Realmente no lo he instalado pero físicamente aparenta ser bastante resistente y bien diseñada, gracias a su articulación disminuye el riesgo de romperse al momento de su instalación o retiro. La parte de la cámara queda bastante rígida para soportar el peso de la misma.

    Hozzászólások
    Mutasd az eredetit
Show:

    Teljes 0 oldalakat

    Menj az oldalra

    recommendation for you
    • Ft34 958
    • Ft5 095
    • Ft3 639
    • Ft3 919
    • Ft2 185
    • Ft2 910
    • Ft3 273
    • Ft4 348
    • Ft2 314
    • Ft6 751
    • Ft3 279
    • Ft3 639
    • Ft5 824
    • Ft4 449
    • Ft9 465
    • Ft30 950
    • Ft5 824
    • Ft3 639