Kiszállítás United Kingdom , USD
A %s legnépszerűbb értékelése a Banggood-on, Vásároljon legjobb %s-t a legalacsonyabb áron a Banggood-on. Vásárlás előtt böngésszen a %s leghasznosabb pozitív véleményében., rc játékok, szórakoztató sport, divat, népszerű elektronika
dimitk 19/10/2021
I am using an Ender3 Pro with direct drive, dual Z screw, and a silent 32bit motherboard with the latest Marlin. With this plate, I didn't lose any printing because of inadequate adhesion. The item is removed easily. It is placed over the original magnetic film of Ender3Pro and I didn't use the one it came with. But know that it is not flat like a glass plate. It has hills and dales. You need a good leveling through the one (manual) provided in Marlin, in 9 points. For the glass plate, I have to enter the same value but for PEI every one point needs a different value. See an example from my latest leveling: +0.16, +0.04, +0.2 -0.01, -0.11, +0.02 +0.17, +0.03, +0.16 Know that with the glass plate I got very strong adhesion only after I cover it with 3M Scotch Painter's Tape.
0
Hozzászólások
Beküldés
Elégedettségi felmérés

Töltse le az APP alkalmazást, hogy exkluzív 10% kedvezményt kapjon a kuponról