This is a good delay timer but it will not delay for more than 10 seconds. Applying 12v to the inputs starts the time cycle one led comes on when you apply power and another comes on when the relay trips after the delay.

This is a good delay timer but it will not delay for more than 10 seconds. Applying 12v to the inputs starts the time cycle one led comes on when you apply power and another comes on when the relay trips after the delay.

This is a good delay timer but it will not delay for more than 10 seconds. Applying 12v to the inputs starts the time cycle one led comes on when you apply power and another comes on when the relay trips after the delay.

The input (trigger) voltage is totally isolated from the relay contacts- some jumper wires from the input to the relay terminals can quickly fix that for an inline power on delay. There's a red power LED which comes on whenever the trigger input voltage is applied. The second green LED comes on after the delay period to indicate when relay is energised. If the trigger voltage is removed during the delay period and then immediately reapplied the full delay period starts again. The maximum delay period on mine is more like 9 seconds than 10. If the pot is wound fully to the shortest delay period there is no discernible delay and the relay is energised immediately when the trigger voltage is applied.

The input (trigger) voltage is totally isolated from the relay contacts- some jumper wires from the input to the relay terminals can quickly fix that for an inline power on delay. There's a red power LED which comes on whenever the trigger input voltage is applied. The second green LED comes on after the delay period to indicate when relay is energised. If the trigger voltage is removed during the delay period and then immediately reapplied the full delay period starts again. The maximum delay period on mine is more like 9 seconds than 10. If the pot is wound fully to the shortest delay period there is no discernible delay and the relay is energised immediately when the trigger voltage is applied.

The input (trigger) voltage is totally isolated from the relay contacts- some jumper wires from the input to the relay terminals can quickly fix that for an inline power on delay. There's a red power LED which comes on whenever the trigger input voltage is applied. The second green LED comes on after the delay period to indicate when relay is energised. If the trigger voltage is removed during the delay period and then immediately reapplied the full delay period starts again. The maximum delay period on mine is more like 9 seconds than 10. If the pot is wound fully to the shortest delay period there is no discernible delay and the relay is energised immediately when the trigger voltage is applied.

fast shipping

fast shipping

fast shipping

28 nap. Az eladó gyorsan küldött. Nem költöttem egy fillért sem, a pontjaimért foglaltam. Még nem kötöttem be, biztonságosnak tűnik. Propanán minőségileg.

Доставка 28 дней. Продавец отправил быстро. Не потратил не копейки,заказал за накопленные баллы. Еще не подключал,выглядит надежно.Пропаяно качественно.

28 nap. Az eladó gyorsan küldött. Nem költöttem egy fillért sem, a pontjaimért foglaltam. Még nem kötöttem be, biztonságosnak tűnik. Propanán minőségileg.

Nice..

Nice..

Nice..

thqnk you

thqnk you

thqnk you

Great choice for the people who like automation :)

Great choice for the people who like automation :)

Great choice for the people who like automation :)

- Very good quality - Works perfectly - Small I recommend this product.

- Very good quality - Works perfectly - Small I recommend this product.

- Very good quality - Works perfectly - Small I recommend this product.

VERY GOOD

VERY GOOD

VERY GOOD

Köszönet a termék megérkezett, mint egy leírás, nincs idő, de a csomagolás szar. Csak egy nejlonzacskó

شكراً وصل المنتج حسب الوصف في وقت قصير ولكن التغليف سيء فقط كيس نايلون

Köszönet a termék megérkezett, mint egy leírás, nincs idő, de a csomagolás szar. Csak egy nejlonzacskó