Arduino Lib : https://code.google.com/p/u8glib/ Arduino Code : http://goo.gl/UWV2fN Arduino Uno or Nano Pins: A4=SDA , A5=SCL

Arduino Lib : https://code.google.com/p/u8glib/ Arduino Code : http://goo.gl/UWV2fN Arduino Uno or Nano Pins: A4=SDA , A5=SCL

Arduino Lib : https://code.google.com/p/u8glib/ Arduino Code : http://goo.gl/UWV2fN Arduino Uno or Nano Pins: A4=SDA , A5=SCL

Very easy to setup. But change default adress for I2C from 0x 3D to 0x 3C !!!!! Required drivers: https://github.com/adafruit/Adafruit_SSD1306 and https://github.com/adafruit/Adafruit-GFX-Library Works with 3.3V and 5V

Very easy to setup. But change default adress for I2C from 0x 3D to 0x 3C !!!!! Required drivers: https://github.com/adafruit/Adafruit_SSD1306 and https://github.com/adafruit/Adafruit-GFX-Library Works with 3.3V and 5V

Very easy to setup. But change default adress for I2C from 0x 3D to 0x 3C !!!!! Required drivers: https://github.com/adafruit/Adafruit_SSD1306 and https://github.com/adafruit/Adafruit-GFX-Library Works with 3.3V and 5V

Great little display have it installed in a housing and with a Wemos mini am able to create a cool weather station

Great little display have it installed in a housing and with a Wemos mini am able to create a cool weather station

Great little display have it installed in a housing and with a Wemos mini am able to create a cool weather station

These displays are tiny, but very cool. The I2C interface reduces number of pins required. https://github.com/adafruit/Adafruit_SSD1306 has the library you need to drive this gem. Great value for an easy to interface TINY display. Not sure why I write these, I never get the review points.

These displays are tiny, but very cool. The I2C interface reduces number of pins required. https://github.com/adafruit/Adafruit_SSD1306 has the library you need to drive this gem. Great value for an easy to interface TINY display. Not sure why I write these, I never get the review points.

These displays are tiny, but very cool. The I2C interface reduces number of pins required. https://github.com/adafruit/Adafruit_SSD1306 has the library you need to drive this gem. Great value for an easy to interface TINY display. Not sure why I write these, I never get the review points.

My first try with Arduino whatsoever. After some troubles with virtual COM port and connecting my Nano V3 to IDE, this display worked after first try. I used the U8Glib_OLED library and U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE); setup.

My first try with Arduino whatsoever. After some troubles with virtual COM port and connecting my Nano V3 to IDE, this display worked after first try. I used the U8Glib_OLED library and U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE); setup.

My first try with Arduino whatsoever. After some troubles with virtual COM port and connecting my Nano V3 to IDE, this display worked after first try. I used the U8Glib_OLED library and U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE); setup.

It looks like the two first pixel vertical columns are in fact the two last ones !! so every picture or drawing or text I display is offsetted by two pixels horizontally and the right border loops to the left one displaying the two last right columns to the left of the screen... those two lines are also vertically offseted by 4 or 5 pixels I'm very dissapointed :(

It looks like the two first pixel vertical columns are in fact the two last ones !! so every picture or drawing or text I display is offsetted by two pixels horizontally and the right border loops to the left one displaying the two last right columns to the left of the screen... those two lines are also vertically offseted by 4 or 5 pixels I'm very dissapointed :(

It looks like the two first pixel vertical columns are in fact the two last ones !! so every picture or drawing or text I display is offsetted by two pixels horizontally and the right border loops to the left one displaying the two last right columns to the left of the screen... those two lines are also vertically offseted by 4 or 5 pixels I'm very dissapointed :(

Ordered these and it arrived very fast. I use the displays everywhere. they are easy to connect and work great with LiPo battery powered Arduino. Will buy more.

Ordered these and it arrived very fast. I use the displays everywhere. they are easy to connect and work great with LiPo battery powered Arduino. Will buy more.

Ordered these and it arrived very fast. I use the displays everywhere. they are easy to connect and work great with LiPo battery powered Arduino. Will buy more.

I ordered this product but the model that I have received is not 128x64 but 128x32. I expect banggood to send me the right model. Nevertheless the model 128x32 model I received works properly.

I ordered this product but the model that I have received is not 128x64 but 128x32. I expect banggood to send me the right model. Nevertheless the model 128x32 model I received works properly.

I ordered this product but the model that I have received is not 128x64 but 128x32. I expect banggood to send me the right model. Nevertheless the model 128x32 model I received works properly.

It is smaller than it looks on web page. Good quality, easy to get working with Adafruit library from github. Packed in small plastic box - very good !

It is smaller than it looks on web page. Good quality, easy to get working with Adafruit library from github. Packed in small plastic box - very good !

It is smaller than it looks on web page. Good quality, easy to get working with Adafruit library from github. Packed in small plastic box - very good !

Works like a charm (I2C address can be changed behind the PCB). I had to download the libs from here : https://github.com/adafruit/Adafruit_SSD1306 https://github.com/adafruit/Adafruit-GFX-Library Changed Adafruit_SSD1306.h to make it work with 128x64 : #define SSD1306_128_64 // #define SSD1306_128_32 // #define SSD1306_96_16 Loaded sketch example that didn't work so I ran an i2c scanner and found the board addr to be 0x3C and changed it in the example source code : display.begin(SSD1306_SWITCHCAPVCC, 0x3C); This 0x3C is not the 0x78 written on the board (see attached photo) so I guess that if you change the SMD resistor you will switch between 0x3C and 0x3D and not 0x76 and 0x7A ... et voila !

Works like a charm (I2C address can be changed behind the PCB). I had to download the libs from here : https://github.com/adafruit/Adafruit_SSD1306 https://github.com/adafruit/Adafruit-GFX-Library Changed Adafruit_SSD1306.h to make it work with 128x64 : #define SSD1306_128_64 // #define SSD1306_128_32 // #define SSD1306_96_16 Loaded sketch example that didn't work so I ran an i2c scanner and found the board addr to be 0x3C and changed it in the example source code : display.begin(SSD1306_SWITCHCAPVCC, 0x3C); This 0x3C is not the 0x78 written on the board (see attached photo) so I guess that if you change the SMD resistor you will switch between 0x3C and 0x3D and not 0x76 and 0x7A ... et voila !

Works like a charm (I2C address can be changed behind the PCB). I had to download the libs from here : https://github.com/adafruit/Adafruit_SSD1306 https://github.com/adafruit/Adafruit-GFX-Library Changed Adafruit_SSD1306.h to make it work with 128x64 : #define SSD1306_128_64 // #define SSD1306_128_32 // #define SSD1306_96_16 Loaded sketch example that didn't work so I ran an i2c scanner and found the board addr to be 0x3C and changed it in the example source code : display.begin(SSD1306_SWITCHCAPVCC, 0x3C); This 0x3C is not the 0x78 written on the board (see attached photo) so I guess that if you change the SMD resistor you will switch between 0x3C and 0x3D and not 0x76 and 0x7A ... et voila !