MT2 Orsótokos eszterga élőközpont CNC Szerszám 0,000197 hüvelyk pontosság
A felülvizsgálat egy részét automatikusan lefordították.
perfecto excelente
Very Good
Praktický pomocník při obrábění tenkých součástek. Porovnání běžného hrotu s prodlouženým hrotem. Je vidět že se nástroj dostane blízko k navrtání a snáze se obrábí.
Körnerspitze hat im vorderen Teil einen Rundlauf von einem 1/2 100 mm! Das ist ein sehr guter Wert! Körner ist gut verarbeitet, hat ein sauberes Finish. Würde ich wieder kaufen!
Excellent craftmanship and performance with near zero runout at a very good price. Nice, small point makes end facing simple. Only minus is that the protruding MT2 small end reduces my quill travel 1/2", but I guess that will be cut/ ground off one of these days.
Very well made product from look and finish. Theres one problem on my lathe: The MT2 shank is a few millimeters to short. I can't stroke back the tailstock far enought to release it. All other orderes MT2 shank parts from Banggood don't have this problem! Luckily I noticed the shank is not hardend, so I will bore in, tap a thread and just put a screw in - Problem solved.
Finish and appearance is exellent. The run out is almost undetectable, i.e., below 0.003 mm.
I needed a small live center for my MT2 tailstock. This live center is a perfect companion to my regular sized one (I like the size of it). The morse taper shank is a bit short and has no thread at the end. This can be easily fixed with a lathe. I'll add a threaded bore so I can put a bolt into it (for easier extraction) . The quality of the bearing is nothing to write home about. I'll see how it stands up to use. Glad I have it. The price is excellent.
pas de jeu propre tourne bien et en douceur , pas de jeu , cone mt2 qui va bien ..
Nagyszerű.