Vásárlói vélemények

Írja meg a véleményét
  • Minden vélemény (21)
  • Kép (4)
  • Videó (0)
  • Minden csillag
    • Minden csillag(21)
    • 5 Csillag(17)
    • 4 Csillag(3)
    • 3 Csillag(0)
    • 2 Csillag(0)
    • 1 Csillag(1)
Sorrend:
Legjobb áttekintés
  • Legjobb áttekintés
  • Leghasznosabb
  • Legfrissebb
Csak az Ön országából származó vélemények (Hungary)
|
Mutasd az eredetit

A felülvizsgálat egy részét automatikusan lefordították.

  • 13/12/2019

    This is not a "normal" winch-controller. Important parts are missing in the description - and of course it does not come with a manual. Comes really nicely packed in a plastic box, does have a PH2.0 plug ("mCPx") for plugging in a winch or motor. I needed quite a lot of time to work out how this winch controller works. It does not work as a "normal" speedcontroller works. You will plug the winch controller directly to the receiver. But you cannot go forwards, backwards (and change speed), if you plug it to channel 2 (ESC channel) Every time, the winch controller gets a signal from the receiver/transmitter, it changes the direction of the motor/winch turn and runs slowly. Next "signal" is stop. Next signal is "run other direction". This has some advantages and some disadvantages, but I think, Banggood or RBR/C should tell us with a manual, how this winch controller works! It means: You can use this winch controller with a simple push button on your transmitter, as many transmitters do have (on the handle) and most people use for switching on/off lights. No 3-position switch is needed to control this winch controller, a push button does the job! This is a big advantage for people using a simple 3-channel transmitter with ch-3 controlled by a push button. They can control a winch now using this controller! But if you have a tx with 3-position switch, you cannot use this winch controller as you were used to with "normal ESCs" - pushing the switch to one direction - winch will go to this direction, center is stop, pushing to the other direction, winch will go to the other direction. This winch controller will work with such a switch, but it will change motor direction every time you push it, no matter, in which direction. So it is always - direction 1 - stop - direction 2 - stop - direction 1 - stop - direction 2 - stop... and so on. Nice: powerd by receiver. Check out BG 1533777 for a rx powered ESC which works perfectly as winch controller.

    Hozzászólások
    Mutasd az eredetit
  • 21/11/2019

    Works awesomely! Its the perfect tool to get past the GT3C ch3 problem. Hit the button once, it feeds the line out, hit again, it stops, hit again, it pulls the line back, then stops when you hit it again. Cycles through it perfectly. Cannot be easier!

    Hozzászólások
    Mutasd az eredetit
  • 13/08/2022

    nagy csörlő vezérlő, kicsi, könnyen telepíthető és működtethető, tökéletesen működik. nagy ár-érték arány.nagyon boldog köszönöm rbr/c és a bumm-jó. 🙂👍

    Hozzászólások
    Mutasd az eredetit
  • 15/02/2020

    Классная и удобная вещь.

    Hozzászólások
    Mutasd az eredetit
  • 03/03/2020

    Semmi baj. - Semmi baj.

    Hozzászólások
    Mutasd az eredetit
  • 30/05/2022

    tökéletesen működik a vezérlő nagyon jó.

    Hozzászólások
    Mutasd az eredetit
  • 18/11/2021

    Minden rendben. Szeretek visszajönni

    Hozzászólások
    Mutasd az eredetit
  • 04/05/2021

    Rendben

    Hozzászólások
    Mutasd az eredetit
  • 28/12/2020

    fast delivery

    Hozzászólások
    Mutasd az eredetit
  • 11/12/2020

    jól néz ki, még nem tesztelték

    Hozzászólások
    Mutasd az eredetit
Show:

    Teljes 0 oldalakat

    Menj az oldalra

    recommendation for you
    • US$7.99
    • US$13.99
    • US$8.04
    • US$31.99
    • US$11.99
    • US$11.99
    • US$30.99
    • US$17.99
    • US$2.99
    • US$38.99
    • US$43.99
    • US$11.99
    • US$9.59