RF-Power8000 1Mhz-8000Mhz OLED RF teljesítménymérő -55dBm ~ -5dBm állítható csillapítási érték
A felülvizsgálat egy részét automatikusan lefordították.
Don't forget to purchase a 2W 30dB (1000 divider) attenuator to get a direct dBm display. Mine came with a +0.3dB offset so I assume it was calibrated at the factory. I tested it with various VTX 5.8GHz transmitters and the power is very accurate, I also tried to insert a set of attenuators and got a very precise value, within +/- 0.1dB range. Very convenient to check the output power or measure the attenuation on cables and SMA connectors, I don't regret my purchase.
Surprising accuracy. A fraction of the cost of another brand but readings are the same. Very happy with this power meter.
A good and easy way to measure with this power meter. And most importantly, you get a good device for reasonable money. I did not regret what I bought. Even put the USB cable. I'm satisfied.
Fitted a 30db attenuator to measure FPV VTX modules and it seems to do the job fine.
Mér valamit, lehet, hogy még teljesen rendben van (az értékeknek van némi értelme a TX teljesítmény ellenőrzése során). De a kérdés az: beállított frekvencia nem sávval, úgy néz ki, mint egy felső határ frekvencia LP szűrő, ahogy több beállítottam, nagyobb értéket mérnek. Tehát biztosan nem azt méri, amit kellene. Az utasítások szintén nem léteznek, így alapvetően fogalmam sincs, hogy meg tudom-e oldani a problémát egyedül. A jó oldalon, akkor lehet használni, hogy összehasonlítsa az antenna és ellenőrizze a TX beállítások tekintetében kimeneti teljesítmény.
Аналог ImmersionRC. Измеряет уровень РЧ сигнала. Настройками задается верхняя граница частоты измеряемого сигнала и ослабление.
ok
Works ok
nice unit!
A good and easy way to measure with this power meter. And most importantly, you get a good device for reasonable money. I did not regret what I bought. Even put the USB cable. I'm satisfied.