Seiko Protection IC 10A Védelmi Lapos 3S 11.1V 12V 12.6V 18650 Lipo Akkumulátorhoz vélemények - Banggood Magyar online vásárlás

:

Download the

Banggood App

Töltse le az alkalmazást, hogy megkapja

3 USD kedvezményes kupon

Szállítás:

Nyelv:

Valuta:

Helló Bejelentkezés Csatlakozik
Bejelentkezés Csatlakozz hozzánk
Új vevő? Kezdd itt.
0

Seiko Protection IC 10A Védelmi Lapos 3S 11.1V 12V 12.6V 18650 Lipo Akkumulátorhoz

US$8.99
~~US$10.79~~
Vásárolj most

Vásárlói vélemények

4.98 / 5

Az összes 122 vélemény megtekintése

Írja meg a véleményét Szerezzen dupla értékelési pontot, ha Ön az első 3 közzétett értékelés egyike!

Minden vélemény (122)
Kép (23)
Videó (0)
Minden csillag
- Minden csillag(122)
- 5 Csillag(119)
- 4 Csillag(3)
- 3 Csillag(0)
- 2 Csillag(0)
- 1 Csillag(0)

Sorrend:

Legjobb áttekintés

Legjobb áttekintés
Leghasznosabb
Legfrissebb

Csak az Ön országából származó vélemények (Hungary)

|

Mutasd az eredetit

A felülvizsgálat egy részét automatikusan lefordították.

AdamDVIP3
GR
03/02/2018

I brought this charger/balancer form Banggood T610 - https://goo.gl/KLukPU and i am very happy. But what about over-discharge protection? So, i brought this 3S protection board. I have tested the cutoff voltage and it is at about 2,33V. This is ok if you are draining your batteries with high current, because you have a fair amound of voltage drop. But it is low if you are using low current. You have to apply charging voltage to overide the "lock" after the over-dischard cutoff and the voltage must be above 2,9V in each battery to do that. I also did the some tests to this 2s protection board https://goo.gl/kJ4qX4 and it is really good and cheap.

I brought this charger/balancer form Banggood T610 - https://goo.gl/KLukPU and i am very happy. But what about over-discharge protection? So, i brought this 3S protection board. I have tested the cutoff voltage and it is at about 2,33V. This is ok if you are draining your batteries with high current, because you have a fair amound of voltage drop. But it is low if you are using low current. You have to apply charging voltage to overide the "lock" after the over-dischard cutoff and the voltage must be above 2,9V in each battery to do that. I also did the some tests to this 2s protection board https://goo.gl/kJ4qX4 and it is really good and cheap.

I brought this charger/balancer form Banggood T610 - https://goo.gl/KLukPU and i am very happy. But what about over-discharge protection? So, i brought this 3S protection board. I have tested the cutoff voltage and it is at about 2,33V. This is ok if you are draining your batteries with high current, because you have a fair amound of voltage drop. But it is low if you are using low current. You have to apply charging voltage to overide the "lock" after the over-dischard cutoff and the voltage must be above 2,9V in each battery to do that. I also did the some tests to this 2s protection board https://goo.gl/kJ4qX4 and it is really good and cheap.
5

Hozzászólások

Mutasd az eredetit
lrogeVIP5
FR
06/09/2019

BMS with a very good quality/price ratio

BMS with a very good quality/price ratio

BMS with a very good quality/price ratio
1

Hozzászólások

Mutasd az eredetit

Show:

Teljes 0 oldalakat

Menj az oldalra

Megy

recommendation for you