Hozzászólások

omgwtfbbq I cut the heatshrink and found a button underneath.The input side is the one with the servo connector, I suppose it should be inserted into a slot on the receiver.I connected the input to a 5V battery and pushed the button several times but the output always remains ad 5V.

omgwtfbbq 22/10/2021
1
Hozzászólások (1)

omgwtfbbq Either the connectors go to the receiver.The blue is for the servo (ch1 on the receiver), used only if you use a low voltage servo plugged into the connector on the esc.The yellow is for the lights (ch3 on the receiver, for example): use an on/off channel on your transmitter.

omgwtfbbq 21/07/2015
7
Hozzászólások (3)