Minden üzenet

Q: what voltage the potensiometer use for pwm?

Kérdezte bigcarlos tovább 2022-05-10 09:37:42

pablotronic i did not measure the voltage. but normaly it makes from 0 volt to 10 volts. this is what most controllers uses.

2022-05-17 02:06:20 Hasznos (0)
Beküldés
Válaszok (1)

Q: can i use ibus on this FC? flysky transmiter and reciever

Kérdezte bigcarlos tovább 2018-08-22 01:00:59

lacvo Yes,this FC is compatible with multiple receivers

2022-02-04 08:38:19 Hasznos (0)
Beküldés
Válaszok (2)

Q: Can I use a 4 poles motor with this esc?

Kérdezte bigcarlos tovább 2018-08-09 02:24:24

Medina44 exactly

2022-01-27 01:09:52 Hasznos (0)
Beküldés
Válaszok (2)

CSientist Youcan connect it directly. But, do not turn the motor manually while connected to avoid any damage to the power supply.

2021-06-20 06:46:13 Hasznos (1)
Beküldés
Válaszok (1)

Q: what's is the recomended prop for 4s battery?

Kérdezte bigcarlos tovább 2019-07-02 01:07:18

mike_fpv I use a 7x7 and it is great. 7x6 also works well on 4s.

2020-11-25 09:47:54 Hasznos (0)
Beküldés
Válaszok (1)

Q: can you put a 4s battery to power up the camera?

Kérdezte bigcarlos tovább 2019-07-19 10:16:08

mich90 l'alimentazione va tramite FC non batteria

2020-08-20 09:29:08 Hasznos (0)
Beküldés
Válaszok (1)

bigcarlos 20 amps on 6s 10x6 triblade prop, i bought 2 diferent props but they came usless imposible to balance :(

bigcarlos 03/07/2019
2
Hozzászólások (3)

Q: what is mpu6000?

Kérdezte bigcarlos tovább 2019-04-26 01:11:23

Riger MPU6000 is the most popular IMU sensor used on most best flight controllers. Reason being used everywhere, the MPU6000 has a great vibration tolerance and it can sample the gyro at 8kHz/8kHz. The ICM20689 can do 32KHZ/32KHZ but it is a highly sensitive gyroscope so super soft mounting, clean build, caps etc. are a must.

2019-04-30 03:32:44 Hasznos (4)
Beküldés
Válaszok (3)