I just received mine today, and have used it with a USB port as input to test the basic functionality. I'm very impressed. It can charge up to 6 x 1S batteries at once, and each is charged and monitored independently. It supports two very common plug types (JST PH 2.0 and Molex Picoblade 1.25mm) built in, and another two (Losi/Walkera and JST red) via the supplied adapter leads. This covers every 1S battery I own, and I have a considerable number! Furthermore, the charge current can be set, again independently for each battery, from 0.1A to 1.0A for the 610 model, and from 0.1A to 0.5A for the 605 model, by 0.1A steps. The input is very flexible, and can be a USB port or power bank, a 2S-6S lipo or a DC source from 9-26V with a 3.5mm connector. If charging from a battery you can set a voltage cutoff so it won't over discharge the input battery. A bright display cycles through the batteries being charged, showing the number of the port e.g. No 1 and the voltage of the battery at that port, so you can monitor what is happening. A red light at each port where there is a battery being charged turns green when that battery has finished charging. Setup is very simple and the instructions are clear. This will be a winner with people who have a lot of 1S batteries. The only things I can think of that I would like to see but are not in it are the ability to charge the new HV 4.35V batteries, and lower current settings, say 20mA and 50mA, for the really small batteries from the Night Vapors, Uberlites etc. It's a most remarkable product and my advice is to snap one up at the promotional price.

I just received mine today, and have used it with a USB port as input to test the basic functionality. I'm very impressed. It can charge up to 6 x 1S batteries at once, and each is charged and monitored independently. It supports two very common plug types (JST PH 2.0 and Molex Picoblade 1.25mm) built in, and another two (Losi/Walkera and JST red) via the supplied adapter leads. This covers every 1S battery I own, and I have a considerable number! Furthermore, the charge current can be set, again independently for each battery, from 0.1A to 1.0A for the 610 model, and from 0.1A to 0.5A for the 605 model, by 0.1A steps. The input is very flexible, and can be a USB port or power bank, a 2S-6S lipo or a DC source from 9-26V with a 3.5mm connector. If charging from a battery you can set a voltage cutoff so it won't over discharge the input battery. A bright display cycles through the batteries being charged, showing the number of the port e.g. No 1 and the voltage of the battery at that port, so you can monitor what is happening. A red light at each port where there is a battery being charged turns green when that battery has finished charging. Setup is very simple and the instructions are clear. This will be a winner with people who have a lot of 1S batteries. The only things I can think of that I would like to see but are not in it are the ability to charge the new HV 4.35V batteries, and lower current settings, say 20mA and 50mA, for the really small batteries from the Night Vapors, Uberlites etc. It's a most remarkable product and my advice is to snap one up at the promotional price.

I just received mine today, and have used it with a USB port as input to test the basic functionality. I'm very impressed. It can charge up to 6 x 1S batteries at once, and each is charged and monitored independently. It supports two very common plug types (JST PH 2.0 and Molex Picoblade 1.25mm) built in, and another two (Losi/Walkera and JST red) via the supplied adapter leads. This covers every 1S battery I own, and I have a considerable number! Furthermore, the charge current can be set, again independently for each battery, from 0.1A to 1.0A for the 610 model, and from 0.1A to 0.5A for the 605 model, by 0.1A steps. The input is very flexible, and can be a USB port or power bank, a 2S-6S lipo or a DC source from 9-26V with a 3.5mm connector. If charging from a battery you can set a voltage cutoff so it won't over discharge the input battery. A bright display cycles through the batteries being charged, showing the number of the port e.g. No 1 and the voltage of the battery at that port, so you can monitor what is happening. A red light at each port where there is a battery being charged turns green when that battery has finished charging. Setup is very simple and the instructions are clear. This will be a winner with people who have a lot of 1S batteries. The only things I can think of that I would like to see but are not in it are the ability to charge the new HV 4.35V batteries, and lower current settings, say 20mA and 50mA, for the really small batteries from the Night Vapors, Uberlites etc. It's a most remarkable product and my advice is to snap one up at the promotional price.

ok

ok

ok

easy to use and it works fine

easy to use and it works fine

easy to use and it works fine

yang saya suka dari produk ini yaitu terdapat 6 buah lubang battery ukuran 3.8v terdapat lampu display masing-masing battery besarnya ampere bisa di setting untuk input bisa menggunakan adaftor 5v micro usb yang biasa digunakan untuk charger handphone untuk lebih jelasnya bisa lihat specifications

yang saya suka dari produk ini yaitu terdapat 6 buah lubang battery ukuran 3.8v terdapat lampu display masing-masing battery besarnya ampere bisa di setting untuk input bisa menggunakan adaftor 5v micro usb yang biasa digunakan untuk charger handphone untuk lebih jelasnya bisa lihat specifications

yang saya suka dari produk ini yaitu terdapat 6 buah lubang battery ukuran 3.8v terdapat lampu display masing-masing battery besarnya ampere bisa di setting untuk input bisa menggunakan adaftor 5v micro usb yang biasa digunakan untuk charger handphone untuk lebih jelasnya bisa lihat specifications

convenient to take

convenient to take

convenient to take

Очень удобная и продуманная зарядка. В комплекте есть переходники, куча вариантов питания и гибкие настройки тока зарядки. Заряжает точно и правильно.

Очень удобная и продуманная зарядка. В комплекте есть переходники, куча вариантов питания и гибкие настройки тока зарядки. Заряжает точно и правильно.

Очень удобная и продуманная зарядка. В комплекте есть переходники, куча вариантов питания и гибкие настройки тока зарядки. Заряжает точно и правильно.

this charger is excellent for charging my 1S batteries either outside in my drivewayat the flying field or at in indoor arena. the unit is easy to set up and charge the batteries.

this charger is excellent for charging my 1S batteries either outside in my drivewayat the flying field or at in indoor arena. the unit is easy to set up and charge the batteries.

this charger is excellent for charging my 1S batteries either outside in my drivewayat the flying field or at in indoor arena. the unit is easy to set up and charge the batteries.

Checked all the Parameters in the 1s Lipo Charger. It lives up to the Mark. Recommended Product.

Checked all the Parameters in the 1s Lipo Charger. It lives up to the Mark. Recommended Product.

Checked all the Parameters in the 1s Lipo Charger. It lives up to the Mark. Recommended Product.

Nagyon jó. Ez HV verzió. meg lehet változtatni erősítő gyorsabb töltés. Próbáltam tölteni USB hálózati bank, de csak egy egy időben.

very good. this is HV version . you can change amp for faster charge. I tried to charge with USB power bank but can only do one at a time .

Nagyon jó. Ez HV verzió. meg lehet változtatni erősítő gyorsabb töltés. Próbáltam tölteni USB hálózati bank, de csak egy egy időben.

A töltő nagyszerűen működik! Csak egy megjegyzés, DC csak a jármű akkumulátoraihoz van. A fali adapter nem működik. Az utasítások nem egyértelműek. Az USB tökéletes.

Charger works great! Just a note, DC is for vehicle batteries only. Wall adapter won’t work. instructions aren’t clear. USB is perfect.

A töltő nagyszerűen működik! Csak egy megjegyzés, DC csak a jármű akkumulátoraihoz van. A fali adapter nem működik. Az utasítások nem egyértelműek. Az USB tökéletes.