Orlandoo F150 OH35P01 KIT Alkatrészek Nehéz Gyűrű GA3001 vélemények - Banggood Magyar online vásárlás

:

Download the

Banggood App

Töltse le az alkalmazást, hogy megkapja

3 USD kedvezményes kupon

Szállítás:

Nyelv:

Valuta:

Helló Bejelentkezés Csatlakozik
Bejelentkezés Csatlakozz hozzánk
Új vevő? Kezdd itt.
0

Orlandoo F150 OH35P01 KIT Alkatrészek Nehéz Gyűrű GA3001

US$8.99
~~US$10.99~~
Vásárolj most

Vásárlói vélemények

4.98 / 5

Az összes 66 vélemény megtekintése

Írja meg a véleményét Szerezzen dupla értékelési pontot, ha Ön az első 3 közzétett értékelés egyike!

Minden vélemény (66)
Kép (6)
Videó (0)
Minden csillag
- Minden csillag(66)
- 5 Csillag(65)
- 4 Csillag(1)
- 3 Csillag(0)
- 2 Csillag(0)
- 1 Csillag(0)

Sorrend:

Legjobb áttekintés

Legjobb áttekintés
Leghasznosabb
Legfrissebb

Csak az Ön országából származó vélemények (Hungary)

|

Mutasd az eredetit

A felülvizsgálat egy részét automatikusan lefordították.

atf300VIP1
SI
28/12/2015

this a nice addition to the 1/35 Ford, but no mounting instructions are to be found. i tore up two tires before i figured it out , so you dont do the same , this is how you mount the rings. 1.Remove the foams and wheels from the tires. 2.press the wheel into the weight ring, so its flush with one side and the hole for the bead on the other side is exposed. 3.gently push the bead of the tire into the hole of the exposed bead. 4. once the bead is int turn the wheel around and push the wheel down , so the exposed bead hole locks in and exposes the bead hole on the other side. 5. gently push the bead of the tire into the hole of the exposed bead. 6. push the wheel down just a bit so its centred with the ring and the beads of the tire are locked into place Hope this helps someone .

this a nice addition to the 1/35 Ford, but no mounting instructions are to be found. i tore up two tires before i figured it out , so you dont do the same , this is how you mount the rings. 1.Remove the foams and wheels from the tires. 2.press the wheel into the weight ring, so its flush with one side and the hole for the bead on the other side is exposed. 3.gently push the bead of the tire into the hole of the exposed bead. 4. once the bead is int turn the wheel around and push the wheel down , so the exposed bead hole locks in and exposes the bead hole on the other side. 5. gently push the bead of the tire into the hole of the exposed bead. 6. push the wheel down just a bit so its centred with the ring and the beads of the tire are locked into place Hope this helps someone .

this a nice addition to the 1/35 Ford, but no mounting instructions are to be found. i tore up two tires before i figured it out , so you dont do the same , this is how you mount the rings. 1.Remove the foams and wheels from the tires. 2.press the wheel into the weight ring, so its flush with one side and the hole for the bead on the other side is exposed. 3.gently push the bead of the tire into the hole of the exposed bead. 4. once the bead is int turn the wheel around and push the wheel down , so the exposed bead hole locks in and exposes the bead hole on the other side. 5. gently push the bead of the tire into the hole of the exposed bead. 6. push the wheel down just a bit so its centred with the ring and the beads of the tire are locked into place Hope this helps someone .
8

Hozzászólások

Mutasd az eredetit
IdBen
CA
28/02/2018

little difficult to mount it but it had for sure a lot of stability and help a lot with roll over. bought 2 for the front only

little difficult to mount it but it had for sure a lot of stability and help a lot with roll over. bought 2 for the front only

little difficult to mount it but it had for sure a lot of stability and help a lot with roll over. bought 2 for the front only
0

Hozzászólások

Mutasd az eredetit

Show:

Teljes 0 oldalakat

Menj az oldalra

Megy

Lehet, hogy érdekli

recommendation for you