Works with my Pi2B after changing config.txt. Dual output with hdmi also possible with some config tuning. Theoritically it should work with Pi4 also. It has a little bit of waving on the vga image, not sure why, but it works.

Works with my Pi2B after changing config.txt. Dual output with hdmi also possible with some config tuning. Theoritically it should work with Pi4 also. It has a little bit of waving on the vga image, not sure why, but it works.

Works with my Pi2B after changing config.txt. Dual output with hdmi also possible with some config tuning. Theoritically it should work with Pi4 also. It has a little bit of waving on the vga image, not sure why, but it works.

Paczka dobrze zabezpieczona. Adapter idealnie pasuje na złącze w Rpi 3. Dobry zakup

Paczka dobrze zabezpieczona. Adapter idealnie pasuje na złącze w Rpi 3. Dobry zakup

Paczka dobrze zabezpieczona. Adapter idealnie pasuje na złącze w Rpi 3. Dobry zakup

First a made the wrong adjustments in the config.txt file but when i copied the settings from http://wiki.52pi.com/index.php/VGA666_Module_For_RPi_SKU:EP-0073 it worked perfectly. it now runs on 1280x1024 no problems. I just need to tell cody this resolution :(

First a made the wrong adjustments in the config.txt file but when i copied the settings from http://wiki.52pi.com/index.php/VGA666_Module_For_RPi_SKU:EP-0073 it worked perfectly. it now runs on 1280x1024 no problems. I just need to tell cody this resolution :(

First a made the wrong adjustments in the config.txt file but when i copied the settings from http://wiki.52pi.com/index.php/VGA666_Module_For_RPi_SKU:EP-0073 it worked perfectly. it now runs on 1280x1024 no problems. I just need to tell cody this resolution :(

Works great, although a lot of the setup information out there is quite outdated. No need to mess around with dt-blob.bin in recent builds. Follow the link in the item description and edit config.txt, good to go. Lookup hdmi_mode= to find out which number to use for dpi_mode=. Most guides only give 2-3 numbers as an example but there are lots of possible output resolutions.

Works great, although a lot of the setup information out there is quite outdated. No need to mess around with dt-blob.bin in recent builds. Follow the link in the item description and edit config.txt, good to go. Lookup hdmi_mode= to find out which number to use for dpi_mode=. Most guides only give 2-3 numbers as an example but there are lots of possible output resolutions.

Works great, although a lot of the setup information out there is quite outdated. No need to mess around with dt-blob.bin in recent builds. Follow the link in the item description and edit config.txt, good to go. Lookup hdmi_mode= to find out which number to use for dpi_mode=. Most guides only give 2-3 numbers as an example but there are lots of possible output resolutions.

works like a charm

works like a charm

works like a charm

This device allows to get a good RGB video signals without a HDMI VGA converter. It uses the GPIO from the Raspberry Pi

This device allows to get a good RGB video signals without a HDMI VGA converter. It uses the GPIO from the Raspberry Pi

This device allows to get a good RGB video signals without a HDMI VGA converter. It uses the GPIO from the Raspberry Pi

Megérkezett, még nem próbáltam.

Megérkezett, még nem próbáltam.

Megérkezett, még nem próbáltam.

Nagyon jó!

very good!

Nagyon jó!

Slow delivery, the product is okay.

Slow delivery, the product is okay.

Slow delivery, the product is okay.

Works as it schould

Works as it schould

Works as it schould