Edvard
- Tartalom
- Minden üzenet
- Vélemények
- Hozzászólások
- Válaszok
- Kérdések
Válaszok
Kérdezte sanagnos tovább 2020-04-13 06:45:13
Válaszok (4)
Q: I need to cut belt to lengh how do i glue the ends to my sided ?????
Kérdezte savagpelkey tovább 2019-12-24 22:49:07
Edvard You need to file about 5 teeth at one end until you reach the metal wires, then file down the back of the other end of the belt until you reach the metal wires (as far in as the tangled teeth). Use contact adhesive on both surfaces (wait 10 minutes) and press the surfaces together.
Hasznos (0)Válaszok (1)
Q: What is the size of the forks? Outer width and inner diameter?
Kérdezte gavrilo.bozovic tovább 2019-04-22 01:24:13
Edvard Notquite sure what you are asking for, but there is a 6mm screw and the probe is about 60mm long The cable lugs is 6.2mm on the outside, 4.1mm on the inside and the fork is about 6.5mm long (inside)
Hasznos (0)Válaszok (1)
Edvard Pretty sure it fits. This is 19mm wide and 9.5mm high, the disc that is going into the groove has a diameter of about 23mm
Hasznos (0)