nosbor78
Tartalom
Minden üzenet
Vélemények
Hozzászólások
Válaszok
Kérdések

Minden üzenet

nosbor78 02/03/2019
Pretty standard fare, and exactly what I wanted and expected.. Small, potted, high voltage, step-up transformers. Quality seems fair to good, especially considering the price point. I haven't tested the input current yet, but my tests were done at 6VDC on an HP 6281A, in open air I got about a 15mm spark. The blue tape in the picture is mine. These have no markings whatsoever, and I didn't want to carve on the case. I don't know how thin the case can get before stray voltage becomes a concern. I lack the equipment to test the output voltage and current. While I doubt the 1MV, the spark is thick and healthy with a nice crack. I'll be interested to see what kind of duty cycle I can get out of them if I can keep them cool. A note on any transformer, running a transformer without any load will destroy it. When I got beyond spark distance the transformer hit a high note like a castrato. Keep the leads in spark distance or keep a load on it, although I'm not sure what kind of load could handle this power. Now I'm off to scare the girlfriend.
3db 1000 KV impulzus gyújtótekercs inverter ívgenerátor
US$17.33 US$16.00
1
Ajánlások
Hozzászólások (0)
nosbor78 19/10/2019
So I bough this for the little sockets that fit on the wow stick. The whole kit is pretty nice, the spreaders and spatulas are surprisingly heavy and the ESD tweezers seem good quality. The flex shaft works quite well. The pry tool is a bit flimsy though.
Wowstick 1 szerszámkészlet kiegészítők csipesz kasza tisztító kefe antisztatikus csuklópánt a barkácsolás javításához
US$23.99 US$32.99
0
Ajánlások
Hozzászólások (0)
nosbor78 12/03/2019
Far louder than I thought it would be. Use a magnifying glass, line the part numbers up to the board, and solder. Pay attention to the orientation of the transistors, the grounding pads face the outside, and don't insert them so deeply you can't get the heatsink on. Depending on the style of heatsink you may have to put attach the heatsink before you solder the transistors in place. It's louder if you let coil arc into the air than if you ground it.
DIY mini zene Tesla tekercs készlet DC 15-24V 2A ZVS plazma kürt hangszóró egycsöves
US$7.69 US$7.29
0
Ajánlások
Hozzászólások (0)
nosbor78 09/03/2019
I got this with the tiny scope like everyone else. The MCX side seats well, and make good contact. The same can be said for the BNC side. It does exactly what it was sold to do.
BNC - MCX adapter a DS203 DS0201 VC101 zseb-oszcilloszkóphoz
US$10.38 US$10.99
0
Ajánlások
Hozzászólások (0)
nosbor78 02/03/2019
Pretty standard fare, and exactly what I wanted and expected.. Small, potted, high voltage, step-up transformers. Quality seems fair to good, especially considering the price point. I haven't tested the input current yet, but my tests were done at 6VDC on an HP 6281A, in open air I got about a 2cm spark. The red tape in the picture is mine. These have no markings whatsoever, and I didn't want to carve on the case. I don't know how thin the case can get before stray voltage becomes a concern. I lack the equipment to test the output voltage and current. While I doubt the 400kV, the spark is thick and healthy with a nice crack. I'll be interested to see what kind of duty cycle I can get out of them if I can keep them cool. A note on any transformer, running a transformer without any load will destroy it. When I got beyond spark distance the transformer hit a high note like a castrato. Keep the leads in spark distance or keep a load on it, although I'm not sure what kind of load could handle this power. Now I'm off to scare the girlfriend.
5 darab DC 3.7V-6V-ról 20KV emelő Step Up Modul Magasfeszültségű Generátor
US$18.39 US$19.99
0
Ajánlások
Hozzászólások (1)
70mai Dash Cam Pro 1944P autós DVR fényképezőgép SONY IMX335 érzékelő 140 fokos FOV kínai változat tól
US$71.84 US$86.21

Q: does it has English language in menus and voice?

Kérdezte silmarx tovább 2018-09-26 09:40:55

nosbor78 Here: https://dashcamtalk.com/forum/threads/has-anyone-laid-their-hands-on-a-70mai-dash-cam-pro-yet.35954/page-7

2019-02-24 04:12:10 Hasznos (0)
Beküldés
Válaszok (9)
nosbor78 31/03/2018
One orders from Banggood with certain expectations, this item beat all of them. The bits are high quality, and hard without being brittle. The handle is comfortable, easy to grip, and easy to get leverage with, far easier than most mini-screwdrivers available stateside. This is definitely a bargain, and I highly recommend it.
XIAOMI Mijia 24 az 1-ben Multifunkciós Precíziós Csavarhúzó Készlet Alumínium S2 Acéllal Javítószerszámokhoz
US$35.64 US$42.99
0
Ajánlások
Hozzászólások (0)

Te vagy a szakértő, tudsz segíteni?

Őszintén meghívjuk Önt, hogy iratkozzon fel a Meghívó Válasz e-mailre!

Ha feliratkozik, e-mailben meghívjuk Önt, hogy válaszoljon az embereknek a termékekkel kapcsolatos kérdéseire. Ha feliratkozol, megkapod a "Hasznos jelvényt " is! Az adatvédelmi beállítások oldalon bármikor leiratkozhat.

Segíts másoknak, és légy boldogabb!

  • Iratkozz fel

A jelvényekről

A jelvények kapcsolódnak a közösséghez, és a felhasználók minőségi tartalom létrehozásával, küldetések teljesítésével vagy speciális tevékenységekben való részvétellel keresnek jelvényeket. Bizonyos emberek saját exkluzív jelvényükkel is rendelkeznek.
Vezérigazgató jelvény

A vezérigazgatói jelvényt csak a Banggood főnöke.

Hamarosan elérhetővé válnak a kitüntetések
  • rendben

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • rendben

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe