*****
Tartalom
Minden üzenet
Vélemények
Hozzászólások
Válaszok
Kérdések

Minden üzenet

Jungster 24/04/2020
The post bag was somewhat ordinary and the box containing the item suffered some damage however the contents inside were okay. The product arrived in the time frame advertised. As per the item description on site all items were present; various adaptor rings for different brand cameras: The four different diffuser rings; the Macro ring Head and controller. It would have been nice to have a control head that was rechargeable rather than using 4 AA Batteries but for the cost that is not a big issue. The adaptor ring fitted okay to my Canon Lens and also easily removed. The Macro ring clips on easily to the adaptor ring but it was a bit awkward to remove but as this was new and I wasn't familiar with the release mechanism not a big issue. The LED ring certainly gives out a lot of light and is easy to set up. The 1.5M range is adequate for most close up shots The 4 colour diffusers give a colour temperature range from 3000 to 15000K. I have not used them but I dare say they have a similar affect to some of the colour filters I use for special effects. Yes I know you could do this with Photo shop but it is still nice to play around...The little hand book written in several languages covers the basics of the unit and its operation. There are more expensive units out there but this certainly does do what I want it to do........I would buy the product again..........
Mamen RF-550D 48pcs makró LED 3000-15000K gyűrűfény 8 adaptergyűrűvel Canon for Nikon for Pentax for Olympus for Panasonic DSLR fényképezőgéphez
US$35.79 US$37.99
4
Ajánlások
Hozzászólások (0)
Jungster 24/04/2020
The watch fell short of my expectations; it is reasonably finished the wrist strap is satisfactory but the problem is that unless you link it to your mobile you can not adjust the time on the watch. As there is no icon available to independently program the time you require to link it to your mobile. The other issue with a lot of these USB time pieces they do not cater for various time zones and South Australia/Northern Territory although part of Australia have a +9.30Hr something manufactures overseas seem to forget time and time again..... Due to the problem of not being able to set the time I haven't bothered to try the other functions available....
BlitzWolf® BW-AT1 teljes képernyős, érintőképernyős, dinamikus UI kijelző Pulzusszám Vérnyomás Oxigén Monitor Időjárás Push Okosóra
US$34.64 US$45.99
0
Ajánlások
Hozzászólások (0)
Jungster 18/11/2018
Fitted the display to a Jumbo Hot Spot. On power up noted that there were some horizontal black lines as the display scrolled upwards. Resetting the display configuration in the hotspot appeared to fix the problem. The display does look impressive with the blue yellow writing....no other issues noted....
Geekcreit® 0,96 hüvelykes 4 tűs kék sárga IIC I2C OLED kijelzőmodul Geekcreit Arduino-hoz – hivatalos Arduino táblákkal működő termékek
US$5.74 US$11.99
1
Ajánlások
Hozzászólások (1)
Jungster 31/10/2019
Unit arrived before actual date of delivery Was reasonably packaged; The PSU received is as pictured complete with power cord and accessory cable.( I swapped power cable for AU version) Unit powered up okay and controls worked ; Coarse and Fine controls for Voltage and current. smooth operation.... However on pickup the unit the PCB seemed to rattle inside the casing. On further investigation the mounting screws on the underside of the unit had come loose. re-tightening the screws fixed the PCB back to the case.(minor Issue but could have been worse) The unit otherwise is a quality product for the price and does work well. Nice bright display which is easy to read.......will recommend the PSU and supplier
Wanptek NPS605W 110V / 220V 0-60V 0-5A Állítható digitális DC tápegység 300W Szabályozott laboratóriumi kapcsoló tápegység
US$80.49 US$116.99
0
Ajánlások
Hozzászólások (0)
Jungster 18/11/2018
Unit is as displayed, header pins included in the pack. Unit worked straight away after being soldered to a MMDVM board. no issues noted with the boards operation...will buy from supplier again.....
0,96 hüvelykes 4pin IIC I2C SSD136 128x64 DC 3V-5V kék OLED kijelző modul
US$15.02 US$10.36
0
Ajánlások
Hozzászólások (0)
Jungster 23/08/2018
The displayed Power Pack Pro v1.1 was used to power up a Pi Raspberry 3 with a single and double MMDVM board complete with a 3.5" Nextion Screen. The board assembly made it easy to fit between the Raspberry Pi 3B and the MMDVM board. No need for a power cable as power is supplied to both boards through the pins. The 4 Led Status give visual indication of battery charge and also charging state of the battery. The little touch on and off switch on the board takes a bit of getting use too as it is a two stage switch. Momentary on takes it into Battery Charge Status while press and hold powers up the Raspberry Pi and MMDVM board. The Li Po battery life is approx 2.5 Hrs this includes running a 3.5Nextion Screen with the Pi 3B. Battery Charging can be done of any USB 5.0V power source......
Geekworm Power Pack Pro V1.1 Lithium Battery Power Source UPS HAT Expansion Board For Raspberry Pi Support I2C / Android Phone Pad Charging
US$16.73
1
Ajánlások
Hozzászólások (0)

Te vagy a szakértő, tudsz segíteni?

Őszintén meghívjuk Önt, hogy iratkozzon fel a Meghívó Válasz e-mailre!

Ha feliratkozik, e-mailben meghívjuk Önt, hogy válaszoljon az embereknek a termékekkel kapcsolatos kérdéseire. Ha feliratkozol, megkapod a "Hasznos jelvényt " is! Az adatvédelmi beállítások oldalon bármikor leiratkozhat.

Segíts másoknak, és légy boldogabb!

  • Iratkozz fel

A jelvényekről

A jelvények kapcsolódnak a közösséghez, és a felhasználók minőségi tartalom létrehozásával, küldetések teljesítésével vagy speciális tevékenységekben való részvétellel keresnek jelvényeket. Bizonyos emberek saját exkluzív jelvényükkel is rendelkeznek.
Vezérigazgató jelvény

A vezérigazgatói jelvényt csak a Banggood főnöke.

Hamarosan elérhetővé válnak a kitüntetések
  • rendben

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • rendben

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe