A ZD Racing 9116 Fém kefe nélküli távirányítható autó,Rc Car Motor legjobb ajánlatai

BG521054350

Tartalom: Minden üzenet; Vélemények; Hozzászólások; Válaszok; Kérdések

Minden üzenet

BG521054350 Hello, thanks for posting a very comprehensive and valuable review! could you share your general opinion on the Taurus motor?

FML 20/03/2021

I bought two MT-8 kits with the CNC upgrades. One to drive and another a few months later as a spare part dispenser. When disassembling the second MT-8, I noticed very negatively that way too much loctite was used. I didn't get some screws loosened and damaged my tool in the process. I had to drill out the screws. The lower suspension brackets (8045 + 8046) were then destroyed. Too much loctite was also used on the c-mounts (8134) and in the hex wheel hub mounts (8086). The screws can only be loosened with very massive screwdrivers. The seal (8265) for the receiver box was missing in both kits. I have installed a 1950 Kv Surpass Taurus 4274 bruhless motor with the standard 13T gear (8195) and standard 48T spur gear (8473) on my MT-8. I recommend installing the stronger motor base (8487). From a 3S Lipo the MT-8 is already quite fast. With a 4S Lipo, wheelies are no problem and the MT-8 becomes a projectile that hardly brings the engine power to the road. The MT-8 then flies over the area and is difficult to control. The construction then reaches its limit. Because of the large wheels, I recommend a powerful 35 kg servo. I also recommend installing the front bumper (8481) and the rear wheel (8482). The front bumper can be upgraded with LEDs. I have a lot of fun with the car, but I would like a little more care when assembling it in the factory. And please don't use so much loctite anymore.

ZD Racing 9116 1/8 4WD Elektromos Teherautó Fémváz 100km/h RC Autó Elektromos Alkatrészek Nélkül

195,68€ 259,98€

Hozzászólások (10)

Hobbi vízálló 3650 4300KV kefe nélküli RC autómotor 60A ESC-vel 1/10 RC autóhoz

49,50€ 52,17€

Q: can I put the motor on the wltoys a959b motor mount?

Kérdezte BG252211341 tovább 2021-06-02 09:42:48

BG521054350 Yes you can. The engine should.fit without much hassle. i put a similar kit in my wltoys 144001 There will be a little less room for the battery. i have solved this by placing it on top of the horizontal support brace. not sure you have to solve it like this on your model, but small adjustments may be required.

2021-07-10 05:28:45 Hasznos

Beküldés

Válaszok (2)

BG521054350 30/06/2021

product is ok for the price, however it has no manual, so putting ut together was abit of tinkering