Minden üzenet

Adrian_paunescu estebun de ceva ?

BG224738131 28/10/2021
Had this for a month now. Arrived very fast, in about three days from CZ to RO, and very well packaged. The instructions inside were not for this model of microscope so you will have to figure out how everything goes together by photos. The matt that it came with is not the one from the picture but it is all the same good. There is no specialized cutout in order to mount the leg through it, a small square was cut from it by hand in order to fit the leg screw but i do not use it like that anyway. The base is used also as a counterweight. The matt is not the same size as the base, it is bigger on all sides. I extended the microscope over the base and placed the mat there but i had to add an extra weight on the base in order to balance it out. You will immediately use the 0.5X Barlow lens since the working distance without it is to small to make repairs. I have not used the 2X at all. Perhaps a 0.75X will come in handy in the future. The camera and the microscope do not focus on the same space so keep this in mind. Also. if you add a lens to the microscope, you will also need one for the camera, in the form of a C mount Lens Adapter otherwise the camera will show a very small part of what you see through the microscope. For the camera, make ABSOLUTE sure that you read the instructions in red written in the product description here on the site. If you plan to use the camera with the hdmi cable, you will need to also use the power brick supplied but if you plan to use the usb cable, you must not use the power brick since the camera draws power through the usb cable also and you risk burning the camera by giving it 2 power sources. Also keep in mind that through the usb connection the camera will only output 30FPS. Overall the package is very good, all components are of good quality, especially for the price. If you have trouble calibrating the microscope, watch a youtube video on how to do it. Most microscopes have similar principles.
2
Hozzászólások (1)

Adrian_paunescu Ever since I installed it, I have seen that after the 12V battery has been charged, it does not keep my voltage stable and rises to 15V! Is the unit broken? Has anyone suffered from this? I monitor the voltage with an external voltmeter connected to the battery

Adrian_paunescu 24/03/2022
0
Hozzászólások (1)

Q: você teria com a saida em 110v ?

Kérdezte giovanni_redes tovább 2019-04-29 02:04:30

AsuBG2020 este modelo não tem saída 110v, mas 220v

2020-10-16 09:33:25 Hasznos (0)
Beküldés
Válaszok (1)

AsuBG2020 yesprovide 3000w, you can weld with it you can use electric motors from 50Hz - 60Hz and you can switch the power supply of the electronic inverter from 12V to 24V

2020-10-16 09:31:52 Hasznos (0)
Beküldés
Válaszok (1)