Imi1979 51 mm

BGizeEug Она всё ещё работает. Нет необходимости менять.

gbrookes The ear pieces for the system have sticky velcro patches you can stick to the inside of your helmet in the position where your ears are, the speakers have a velcro backing so if the inside of the helm... The ear pieces for the system have sticky velcro patches you can stick to the inside of your helmet in the position where your ears are, the speakers have a velcro backing so if the inside of the helmet is fabric it might stick without using the patches. I used mine on a set of old headphones whose wires had failed, because my bike helmet has open ear areas so you can hear the traffic. The microphone also has a velcro patch, so if you have an open helmet you can stick it on to the outside of the helmet and have the microphone in front of your mouth, or with a full face mask you can position it so it sits inside the helmet in front of your mouth. Obviously you need space inside the helmet in front of your mouth for it to fit. There is a sponge pad over the mic that is about 28mm wide and about 35mm long though you can remove it if you want. It would be inside the helmet so I suspect you could cut half of it off and just have the pad on the side your mouth is for it to work properly and take up less room. The mic itself is on a flexible metal arm that is about 13cm long and can be bent any way you like to fit inside a helmet. (that is 13cm of arm not including the mic.). Többet látni

Vance 2xl