Kiszállítás United Kingdom , USD
A %s legnépszerűbb értékelése a Banggood-on, Vásároljon legjobb %s-t a legalacsonyabb áron a Banggood-on. Vásárlás előtt böngésszen a %s leghasznosabb pozitív véleményében., rc játékok, szórakoztató sport, divat, népszerű elektronika
JPDuhen 11/01/2019
To flash, connect GPIO0 and GPIO2 to GND, remove the camera, power it with 3.3V, not 5V. The board needs to be programmed with ESP-IDF as explained in details in Github, https://github.com/donny681/ESP32_CAMERA_QR and there’s no Arduino IDE support. So if you’r not comfortable with using Espressif development framework better skip this board. The demo code takes a QR code, and outputs it as ASCII code in the serial console.
8
Hozzászólások (1)
Beküldés
  • Mark Hurley Ihad to power it with 5V to get the camera working properly. And this is compatible with Arduino IDE -- just be sure to add ESP setup beforehand.

    Válasz 08/05/2019
Elégedettségi felmérés

Töltse le az APP alkalmazást, hogy exkluzív 10% kedvezményt kapjon a kuponról