Kiszállítás United Kingdom , USD
A %s legnépszerűbb értékelése a Banggood-on, Vásároljon legjobb %s-t a legalacsonyabb áron a Banggood-on. Vásárlás előtt böngésszen a %s leghasznosabb pozitív véleményében., rc játékok, szórakoztató sport, divat, népszerű elektronika
wesratliff1 14/05/2020
AWESOME!! I sprung for this model over the cheaper ones.. because 200mW, that's why! Great device, image is nice and clear for the resolution. Definitely not anywhere near even 480i picture resolution.. Clover antenna was annoying and pretty much in the way for mounting - Hobby Plus CR24. So, I de-soldered the antenna, and made a new antenna with some RG316. After the antenna swap, was able to mount where I wanted. I would highly, highly recommend (if anyone has these lying around) taking a RaspberryPi CPU heat-sink and applying it to the chips near the display. My cam doesn't get that much 'fresh air' to the cabin being enclosed, so this was pretty much melting my body away! YEAH! that hot.. So after the heat-sink, all the heat was going there, instead of the tiny PCB, and not melting my truck! The range before was decent, but after swapping antennas I was able to go much much further. Antenna equation is easy: C/5.8/4 = 12.9mm (length of core exposed). I abruptly did the same tweak to my receiver antennas as well. Definitely a must have for your FPV cam, I would recommend doing the antenna swap if comfortable with electronics and wiring. Goes up to 5.9GHz so check your local FCC compliance!
0
Hozzászólások
Beküldés
Elégedettségi felmérés

Töltse le az APP alkalmazást, hogy exkluzív 10% kedvezményt kapjon a kuponról