Kiszállítás United Kingdom , USD
A %s legnépszerűbb értékelése a Banggood-on, Vásároljon legjobb %s-t a legalacsonyabb áron a Banggood-on. Vásárlás előtt böngésszen a %s leghasznosabb pozitív véleményében., rc játékok, szórakoztató sport, divat, népszerű elektronika
shornikov_alexander 22/06/2021
Посылка пришла быстро. Пластик хороший, корпус жесткий. Взял белые, чтобы не нагревались на солнце. Качество картинки отличное. Огорчило то, что корпус от TBS Fusion не подходит, пришлось колхозить.
1
Hozzászólások (9)
Beküldés
  • Moritz Hi,great pictures. Thanks for sharing. I have a question about the usage of the "TBS Fusion". Do you think it is possible to design a cover and print it on a 3D printer? Would the antennas still fit? Or is it just too tight?

    Válasz 10/10/2021
  • shornikov_alexander hi, sorry for seeing the question so late. Yes, I think it is possible to design an overlay by printing it on a 3D printer. But everything worked out for me, so that it was not without a file, you need to measure everything. The fact is that, for example, a standard mount from a native cover will no longer fit, there is not enough space. Antennas will fit

    Válasz 12/11/2021
  • shornikov_alexander hi, sorry for seeing the question so late. Yes, I think it is possible to design an overlay by printing it on a 3D printer. But everything worked out for me, so that it was not without a file, you need to measure everything. The fact is that, for example, a standard mount from a native cover will no longer fit, there is not enough space. Antennas will fit

    Válasz 12/11/2021
  • shornikov_alexander Yes it is too tight, and the body of the TBS device protrudes significantly

    Válasz 12/11/2021
  • shornikov_alexander @Moritz hi),sorry for being late with an answer, but the setup is very tight. You can't put a standard lid in any way. It may be possible to fit a printed cover, but there is too little room for that. The connector for the antennas is standard, but the module board protrudes significantly than the Steadyview, which is included in the package

    Válasz 12/11/2021
  • shornikov_alexander Onthe issue of antennas, I did not quite understand, but the installation is normal and will protrude than the receiver, which is included in the kit

    Válasz 12/11/2021
  • shornikov_alexander @Moritz Hi)as you can see, I still haven't been able to come up with anything with this. It is very cramped here, tight and little space, and the difference in the size of the protective covers on the face. I'm afraid that even printing on a 3D printer will not solve the problem. It is possible to design, but then it is better to do it without physical fasteners, and so that you can simply temporarily glue it to the body. It is possible to use an adapter that will be glued from the outside. I even found one, but its production was closed. https://www.banggood.com/SKYZONE-Receiver-Bay-Mount-Holder-DIY-Case-Cover-for-02C-02X-03S-03O-FPV-Goggles-p-1657852.html?imageAb=1

    Válasz 12/11/2021
  • shornikov_alexander @Moritz Hello!)In fact, there is very little space for a standard AAA cover, very tight and small volume. The module sticks out significantly and the attachments of the protective covers supplied with the glasses and the module differ significantly in size, which makes it impossible to install them. It is possible to print the cover on a 3D printer, but then you need to exclude the fasteners and just glue it on the FPV glasses case. On the issue of antennas, I did not quite understand, but they will stick out somewhat, but this does not interfere, everything works.
    There is also an adapter and I even found one, but its production was closed.
    https://www.banggood.com/SKYZONE-Receiver-Bay-Mount-Holder-DIY-Case-Cover-for-02C-02X-03S-03O-FPV-Goggles-p-1657852.html?imageAb=1

    Válasz 12/11/2021
  • shornikov_alexander Oops

    Válasz 17/11/2021
Elégedettségi felmérés

Töltse le az APP alkalmazást, hogy exkluzív 10% kedvezményt kapjon a kuponról